| 特性 CHARACTERISTIC |
纺粘不织布 SPUNBONDED |
|
| 质轻 Light weight |
以聚丙烯树脂维主要生产原料，比重仅0.91，较多元酯、耐龙等材质为轻。同基重制品厚度较厚，具蓬松性。 |
Use polypropylene as the main raw material whose gravity is only 0.91, lighter then thatof polyester and nolong. Comparing by the same weight. NON WOVEN is thicker and loosening. |
| 柔软 Softness |
由细纤维组成（2-3D）轻点状热熔粘结成型。成品柔软度适中，具舒适感。 |
Composed of fine fibers (2-3D) and reinforced by heat-sealing,spunbonded fabrics has good softness and touch. |
| 拨水透气 Water Repellent & Air Permeability |
PP树脂不吸水含水率零，制品拨水性佳，且由100%纤维组成，具多孔性，制品透气性佳，易保持布面干爽。 | NON WOVEN is made of 100% hydrophobic PP fibers, so it has excellent water repellent and air permeability. As a result NON WOVEN feels comfortable and dry. |
| 无毒、无刺激性 Non-toxic Odorless |
采用符合FDA食品级原料生产，以热粘结方式成型，制品不含其他化学成分，五毒、无异味且不刺激人体皮肤。 | Using the raw materials which are approved
for food packing in accordance with the FDA regulations, and reinforced by heat-realling,
NON WOVEN contains no other chemicals,no toxic materials, no odor and will not cause
allergy to the human skin. |
| 抗化学剂 Chemical Resistance |
PP树脂属化学成分钝性物质，抗化学侵蚀强度佳，质品不受侵蚀而影响强度。 | PP fiber has excellent chemical resistance from corrosion, so physical properties will not be influenced by any chemicals and solvents. |
| 抗菌性 Bacteria Resistance |
制品具拨水性，不发霉并能隔离存在液体内细菌几虫类的侵蚀。 | The excellent water repellent will get rid of musty and any attack of moths and bateria. |
| 物性佳 Excellent Physical Properties |
籍高速空气扰流将纤维缠结成棉网，再经热粘结补强，制品强度较一般短纤产品为佳，强度无方向性，从、横向强度相近。 | Spunbonded fabrics has excellent physical propertices than that of the staple fiber products by entangling high speed air turbulence and heat-sealing reinforced. Same strenghs of machinary and cross directions offers much convenient to processing. |
| 加工容易 Easy Prcocessing |
PP树脂属热可塑型树脂，质品强度佳。除可以一般针车加工外，亦可以高周波热熔缝合方式加工。因PP熔点仅165摄氏度，受热易收缩，加工温度以不超过120摄氏度为宜。 | Being made of thermoplastic PP fibers and having excellent strength, NON WOVEN can be processed through not only the common quiting machine but also the ultrasonic sawing and welding machine. Since the meltpoint of PP is 165, the processing temp, should not exceed 120 in order to prevent shinkage. |